Craft HTV Rose Pattern Silver Heat Transfer Vinyl (Comes with Protective Film or Liner)
| Technical Guide | Adhere to | ||||||
|---|---|---|---|---|---|---|---|
 Thickness |
10(70) micron |
 Temperature |
140-150℃ |
 Pressure |
Medium |  |
100% Cotton 100% Polyester 100% Poly & Cotton Blends Lycra & Spandex Sublimated Polyester Neoprene |
 Adhesive |
Sticky |
 Time |
8-12 sec |
 Peel |
Hot, Warm Peel | ||
| Cutter Blade | Washing Condition | Storage Condition | |||||
|---|---|---|---|---|---|---|---|
 Blade |
Blade:45˚ |  |
Detergent Standard(Household) |
 |
Do not twist strongly |  |
Cool and dry place without direct Sunlight |
 |
Don’t use Steam Avoid direct contact |
 |
60℃ or below | ||||
Application instructions (home iron)
• Cut material – mirror your design!
• Weed excess material
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier Warm or cold
Application Instructions (heat press)
• Cut material – mirror your design!
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 8-12 seconds
• Peel carrier Warm or Cold
Original: $6,561.18
-70%$6,561.18
$1,968.35Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
| Technical Guide | Adhere to | ||||||
|---|---|---|---|---|---|---|---|
|
Thickness |
10(70) micron |
Temperature |
140-150℃ |
Pressure |
Medium | |
100% Cotton 100% Polyester 100% Poly & Cotton Blends Lycra & Spandex Sublimated Polyester Neoprene |
|
Adhesive |
Sticky |
Time |
8-12 sec |
Peel |
Hot, Warm Peel | ||
| Cutter Blade | Washing Condition | Storage Condition | |||||
|---|---|---|---|---|---|---|---|
|
Blade |
Blade:45˚ | |
Detergent Standard(Household) |
|
Do not twist strongly | |
Cool and dry place without direct Sunlight |
|
Don’t use Steam Avoid direct contact |
|
60℃ or below | ||||
Application instructions (home iron)
• Cut material – mirror your design!
• Weed excess material
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier Warm or cold
Application Instructions (heat press)
• Cut material – mirror your design!
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 8-12 seconds
• Peel carrier Warm or Cold
